Grey Carbon Based Hy-510 Thermal Grease, Thermal Paste for Processor 10g Heat Sink, CPU, Laptop, PC (Pack of 5)

10g Grey Heat Sink Compound Thermal Silicon Conductive Grease Paste for PC CPU GPU Chipset Ovens Cooling

Thermal Grease Paste Compound Silicone for CPU Heat Sink

10g Grey Heat Sink Compound Thermal Silicon Conductive Grease Paste for PC CPU GPU Chipset Ovens Cooling

• Thermal coupling of electrical / electronic device to heat sinks
• High Thermal Conductivity:; Low Bleed and Stable at high temperature

Nano particle structure

Fine-grained aluminum and zinc oxide contained in the paste interpolate the slight unevenness of the heat medium such as CPU and the heat sink, achieving excellent thermal conductivity.

Stability

A special compound that does not dry at a high temperature of 80 ° C is used to maintain stable properties without curing for a long time.

Non-conductive

There is no concern about shorts due to non-conductivity.

Clean the object and heat sink surfaces

Wipe the surface lightly with a cotton ball or cotton swab dampened with isopropyl alcohol. The higher the percentage of alcohol the better. 70 percent is good but 90 percent is better (if you can find it).

Sand the heat sink and object surfaces if necessary

Thermal paste is designed to fill in the gaps and imperfections on the surfaces that you are joining. Since modern production techniques cannot make surfaces without imperfections, thermal paste will always be necessary.

How to Apply Thermal Paste

The lines method – Place two thin lines of thermal compound on the base of the cooler. The lines should be parallel and spaced so that they are each placed a third of the width of the processor. The lines themselves should also be about a third of the processor’s width in length.